Nexa BALENO 2016, Инструкция по эксплуатации и сервисная книжка

Страница: 126 / 334

2-100
BEFORE DRIVING
68PH0-74E
However, repeating these operations could
cause the power steering system dam-
aged.
NOTE:
If the power steering system does not work
properly, you will feel heavier to steer but
you still will be able to steer.
NOTE:
If the steering is operated, you may hear
noise. This is normal and indicates that the
power steering system works properly.
Engine coolant temperature light
(if equipped)
68PH00274
When the ignition switch is turned to the
“ON” position, this light comes on briefly so
you can check that the light is working.
This indicator has two following functions.
Low engine coolant temperature light
(blue color)
This light stays on while the engine is still
cold and goes off when the engine has
warmed up.
If this light blinks, there is a problem with
the system. Have your vehicle inspected
by your MARUTI SUZUKI dealer.
High engine coolant temperature warn-
ing light (red color)
If this light blinks while driving, it means the
engine is running hot. Avoid driving condi-
tions that may lead to actual overheating. If
the light stays on without blinking, then the
engine is overheating. Follow the instruc-
tions in the “Engine trouble: Overheating”
of “EMERGENCY SERVICE” section.
Turn Signal Indicators
50G055
When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will flash along with the
respective turn signal lights. When you
turn on the hazard warning switch, both
arrows will flash along with all of the turn
signal lights.
Main Beam (high beam) Indicator
Light
50G056
This indicator comes on when headlight
main beams (high beams) are turned on.
Illumination Indicator Light
64J045
This indicator light comes on while the
position lights, tail light and/or the head-
lights are on.
NOTICE
Continuing to drive the vehicle when
engine overheating is indicated can
result in severe engine damage.