Nexa BALENO 2016, Инструкция по эксплуатации и сервисная книжка

Страница: 107 / 334

2-81
BEFORE DRIVING
68PH0-74E
Driving time
68PM00286
(10) Driving time
Driving time from previous reset is shown.
To reset the driving time, push and hold the
indicator selector knob (2) for about 2 sec-
onds when the display indicates a driving
time. The display shows “---” and then indi-
cates a new driving time after driving for a
short time.
NOTE:
Disconnection of the battery negative (-)
terminal will reset the indication of the driv-
ing time.
Clock and date
Date and time are shown. For the setting
procedure, refer to “Setting mode” in this
section.
Torque and Power
Present engine torque and power are
shown.
Information of after driving
When you press the engine switch to
change the ignition mode to “LOCK”
(OFF), the following information appears
for several seconds on the information dis-
play.
68PS00214
Torque and Power display
Display (e) shows Torque and Power
graphs at various vehicle condition.
This figure is for reference only and indica-
tion may not be same as actual value.
Gearshift Indicator
The display (D) shows some of the follow-
ing indications.
Refer to “Gearshift Indicator” in the
“OPERATING YOUR VEHICLE” section.
Trip meter
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for
about 2 seconds when the display shows
the trip meter.
Odometer
The display (F) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
(10) (10)
EXAMPLE
EXAMPLE
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.