Newworld NWLF600, Инструкция по установке и эксплуатации, Страница: 6 / 13

STARTING
Final Check
Before you start using the refrigerator check that:
1. The f eet h ave b een a djusted f or p erfect l evelling .
2. The i nterior i s d ry a nd a ir c an c irculate f reely .
3. Clean the interior as recommended under "CLEANING AND C ARE ."
4. Insert the plug into the wall socket and switch on the electricity supply.
When the door is open the interior light will come on.
5. You w ill h ear a n oise a s t he c ompressor s tarts u p . The l iquid a nd g ases s ealed
within the refrigeration system may also give rise to noise, whether the compressor
is running or not which is quite normal.
6. W e r ecommend t hat y ou s et t he t hermostat k nob a t 3 (t hree ) a nd m onitor t he
temperature to ensure the appliance maintains desired storage temperatures
(See section Temperature Control and Adjustment).
7. Do not load the appliance immediately it is switched on. Wait until the correct
storage temperature has been reached. We recommend that you check the
temperature with an accurate thermometer (see; Temperature Control and
Adjustment).
Important Note :
Ice formation at the back is normal, do not worry. (See Defrosting)
DEFROSTING
The larder fridge defrosts automatically.
The defrosting water runs to the drain
tube via a collection channel and is
evaporated in a special container (1) at
the back of the appliance (see diagram).
During defrosting water droplets may
format the back of the larder fridge where
concealed evaporator is located. Some
droplets may remain on the liner and
refreeze when defrosting is completed.
Do not use pointed or sharp edged objects such as knives, forks to remove
the droplets which have refrozen.
If at any time the defrost water does not drain from the collection channel,
check to ensure that no food particles have blocked the drain tube. The drain
tube can be cleared by pushing the special plastic plunger provided down the
drain tube (2).
10
CLEANING AND CARE
** We recommend that you switch off the larder refrigerator at the socket
outlet and pull out the mains plug before cleaning.
** Never use any sharp instruments or abrasive substances, soap, household
cleaner, detergent and wax polish for cleaning.
** Use luke warm water to clean the cabinet of the refrigerator and wipe it
dry.
** Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate
of soda to one pint of water to clean the interior and wipe it dry.
** Make sure that no water enters the temperature control box.
** If the larder refrigerator is not going to be used for a long period of time
switch it off, remove all food, clean it and leave the door ajar.
** Check door seals regularly to ensure they are clean and free from food
particles.
** Never :
Subject it to hot temperatures in any way,
Scour, rub etc., with abrasive material.
** Removal of door tray :
To remove a door tray, remove all the contents and then simply push
the door tray upwards from the base.
11