Newworld NWLF600, Инструкция по установке и эксплуатации, Страница: 2 / 13

2
Congratulations on your choice of a New World quality Appliance which has been
designed to give you service for many years.
WARNING !
IMPORTANT !
DO NOT connect the appliance to the electricity supply until all packing and transit
protectors have been removed.
Leave to stand for at least 4 hours before switching on to allow compressor oil to
settle if transported horizontally.
If you are discarding an old refrigerator with a lock or latch fitted to the door, ensure
that it is left in a safe condition to prevent the entrapment of children.
This fridge must only be used for its intended purpose i.e the storing of edible
foodstuff.
Do not dispose of the appliance on a fire. At
, the care and protection of New World
our environment is an ongoing commitment. This appliance which is among the
latest range introduced is particularly environmentally friendly. Your appliance contains
non CFC / HFC natural substances in the cooling system (Called R600a) and in
the insulation(Called cyclopentane) which are potentially flammable if exposed to
fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance
in transportation and in use. In case of a damage do not expose the appliance to
fire, potential ignition source and immediately ventilate the room where the appliance
is situated.
We suggest you contact your local authority for disposal information and facilities
available.
We do not recommend use of this appliance in an unheated, cold room. (E.g.:
garage, conservatory, annex, shed, out-house etc.)
To obtain the best possible performance and trouble free operation from your
appliance it is very important to carefully read these instructions.
On delivery, check to make sure that the product is not damaged and that all the
parts and accessories are in perfect condition.
Ensure that the plug remains readily accessible. Do not use a multiple adapter bar
or extension cable.
Failure to observe these instructions may invalidate your right to free service during
the guarantee period.
WARNING- Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING- Do n ot u se m echanical d evices o r o ther m eans t o a ccelerate t he
defrosting process, other than those recommended by the manufacturer.
WARNING- Do n ot d amage t he r efrigerant c ircuit .
WARNING- Do n ot u se e lectrical a ppliances i nside t he f ood s torage c ompartments
of the appliance, unless they are of the type recommended by the manufacturer.
We suggest you keep these instructions in a safe place
for easy reference.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure that the voltage and
the frequency shown in the rating plate inside the appliance corresponds to
your electricity supply. Rating label is on the left hand side of fridge liner.
We recommend that this appliance is connected to the mains supply via a
suitable switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or should it need
replacing at any time, it must be replaced by a special purpose made mains
lead which can only be obtained from a New World Authorised Service Agent.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable for your socket, then the plug should
be cut off and an appropriate plug fitted. Destroy the old plug which is cut off
as a plug with bared cord could cause a shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse
need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover. In the event of losing the
fuse cover the plug must not be used until a replacement fuse cover has been
fitted. Colour of the replacement fuse cover must be the same colour as that
visible on the pin face of the plug. Fuse covers can be obtained from a New World
authorised service agent.
IMPORTANT! FITTING A DIFFERENT PLUG
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
in your plug proceed as follows:
(See diagram).
1. Connect t he g reen -y ellow o r
green (Earth) wire to the terminal
in the plug marked 'E' or with the
symbol
or coloured green and
yellow or green.
2. Connect t he b lue (N eutral ) w ire
to the terminal in the plug marked
'N' or coloured black.
3. Connect the brown (Live) wire
to the terminal in the plug marked
'L' or coloured red.
With alternative plugs a 13 A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If
in doubt contact a qualified electrician.
3
FIT
TED WITH
BS 1362 13A
FUSE
AL
W
A
Y
S
FIT
BS 1362 REPL
A
CEMENT
CAR
TRIDGE FUSE
GREEN
&
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP