Newworld NWINT15FSW, Инструкция по эксплуатации

Страница: 20 / 41

Functions 20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
Functions
Simple everyday use
The Control Panel
4.1 Selecting a Programme
Press the Power On/Off button (1). The End Of
Programme Indicator (4) will illuminate.
Select the programme that best suits your dishes
using the Programme Selection button (2).
The light corresponding to the selected programme
(5) will illuminate and the End Of Programme
Indicator (4) will switch off.
The Programme will start automatically when the
door is closed.
NOTE (Only for models with extra features): IF
an extra feature has been used on the most recent
wash programme, this feature will remain active on
the next selected programme. If you want to cancel
thisd feature on the newly selected programme, press
the feature button until the light on the button
switches off.
NOTE: If you decide not to start the selected
programme, please see the "Changing a Programme"
and "Cancelling a Programme" sections.
NOTE: When there is not enough dishwasher
salt, the refil Salt Warning Indicator (4) will illuminate
indicating the salt chamber needs filling.
NOTE: When there is not enough rinse aid,
the refil Rinse Aid Warning Indicator (4) will illuminate
to indicate the rinse aid chamber needs filling.
4.2 Delaying a Programme
Press the delay button to delay the start time of a
programme for 3, 6 or 9 hours Pressing once will
delay the start time for 3 hours, twice to delay for 6
hours and three time for 9 hours. The programme can
be selected first and the delay duration after or vice-
versa. Press the delay timer button to change or
cancel the delayed start time.
4.3 Changing a Programme
Follow the steps below to change a programme while
in operation:
The remaining delay time will show on the display and
the light corresponding to the delay duration (3h, 6h,
9h) will be on.
NOTE: Open the door slightly at first to stop a
programme before it is complete in order to avoid
water spillage.
4.4 Cancelling a Programme
Follow the steps below to cancel a programme while
in operation:
1
2 3 4
5