36
Conversion Instructions
1. To Convert Hotplate Burners
b. Remove burner caps and burner
heads.
c. Unscrew existing injectors from
hotplate burner bowls.
d. Replace with injectors in conversion
kit as detailed below.
Note: When converting the wok
burner, it is necessary to replace 2
injectors. The inner injector and
the outer injector, the outer injector
is visible on removal of the cover
plate.
2. To Convert hotplate Bypass
Pins.
a
Open the left hand main oven
door unscrew the top hinge and
remove it.
b
Remove the left hand main oven
door
c
Open the right hand main oven
door unscrew the top hinge and
remove it.
d
Remove the right hand main oven
door
e
Remove the two side panels by
unscrewing the four screws on
each side. This will give access to
the screws for the fascia.
f
Remove the control knobs then
unscrew and remove the outer fas-
cia panel
g
Gently lower the fascia panel
h
The hotplate bypass screws are
now accessible through the inner
fascia panel.
Installation Instructions
Before carrying out this procedure ensure that the appliance is
disconnected from both gas and electric al supplies.
100DF Hotplate burner
Quantity
Nominal rate Qn Injector marking
injectors Small burner
Medium burner
Large burner
Wok outer burner
Wok inner burner
2
3
1
1
1
1.0kW
2.0kW
3.0kW
3.5kW
50
70
87
87
35
Total Heat Input
14.5kW
Bypass
Screws
Bypass pin wok tap
Bypass pin large tap
Bypass pin medium tap
Bypass pin small tap
1
1
3
2
-
-
-
-
68
40
32
27
Содержание 100DFT
Страница 41: ...08 25410 04 10 2009...
Страница 42: ...08 25410 04 10 2009...
Страница 43: ...08 25410 04 10 2009...