NewTek TriCaster TCXD300, Руководство пользователя

Страница: 32 / 290

Page | 16
At this point, the blue Power LED will illuminate, and the adjacent hard drive activity light should
flicker as the device boots up. (If this does not happen, check your connections and retry).
Hint: Though not required for TriCaster to function, it is always wise to use an uninterruptable
power supply (UPS) for any ‘mission critical’ system. Likewise, consider A/C “power conditioning”,
especially in situations where local power is unreliable or ‘noisy’.
Power conditioning can reduce wear on power supplies and other electronics, and also provide a
measure of protection from surges, spikes, lightning and high voltage.
3.2 ACTIVATING & AUTHORIZING WINDOWS™
(Your dealer may have performed this operation for you as part of his pre-delivery service.)
When you see the ‘
Welcome to Windows ’ screen:
1. Click Next at lower right.
2. Choose your time zone.
3. Accept the license agreement.
4. Enter your 25-digit key.
5. Decline automatic updates (by clicking “not right now”).
6. Give TriCaster a distinct computer name for networking.
You can authorize your Windows installation by network or by telephone. Assuming you have an
Internet connection available, and have connected TriCaster to it with an Ethernet cable, the
Internet is the fastest method of activation. (See Section 3.13 for more on network connections.)
7. Click ‘Obtain IP and DNS automatically’.
8. Agree to activate Windows. This activation is permanent, and you won’t see these
screens again. (Registration with Microsoft is optional).
9. Assign a name to the administrator account. You may type your name, company, or
perhaps simply “TCXD”.
10. Click Finish , and you system will re-start.
After restarting and accepting NewTek’s User Agreement , the interface will load automatically.