NewTek 3Play 3P1, Руководство пользователя

Страница: 171 / 206

Page | 157
17.4.1 CONFLICTED SHORTCUTS
Figure 176
By the way, assigning identical shortcut combinations to multiple macros is supported, and deliberately
so. Still, as you may wish to avoid conflicts, a yellow triangular gadget referred to as a ‘bang’ (or, if you
are in a certain mood, a ‘conflict nacho’) is shown in this case.
Bangs appear at right for all macro entries in the Macro Configuration panel lister with shortcut conflicts.
Figure 177
Of course, when multiple shortcuts are assigned, the first shortcut for a macro – i.e., the one displayed at
right in the Macro Configuration panel lister – may not actually be the one that is conflicted; too, there
might be several conflicts for a single macro.
In such a case, select the macro in the list to show the corresponding Shortcuts group entries at the bottom
of the panel (Figure 177). Conflicted ‘Listen’ controls will all show bangs. Clicking a bang automatically
jumps to the next conflicted entry, so you can advance quickly through them, resolving conflicts as you
go.
(Obviously, you can resolve a conflict by assigning a different keystroke to conflicted macros. Or you can
disable macros if you like, using the checkmark switch.)
Hint: Folder level checkmark switches offer a method for managing ‘deliberate’ shortcut conflicts. For
example, the shortcuts assigned to entire folders of macros designed for various sessions or purposes can
conflict with shortcuts in another folder., but keystrokes for any inactive folders are ignored.
DELIBERATE ‘CONFLICTS’
Otherwise, pressing the conflicted shortcut key will perform all macros sharing that keystroke assignment.
On the other hand, your ‘conflicts’ may be deliberate; running multiple macros with just one button press
or gesture may be just what you had in mind.