NewTek 3Play 3P1, Руководство пользователя

Страница: 109 / 206

Page | 95
10 RECORDING AND STORAGE
Recording audio and video from its inputs for review, instant replay or
other purposes is the core function of your NewTek 3Play® system.
This section provides helpful information about recording and storage
volumes, as well as explaining how recording is enabled and disabled.
Live, or previously recorded audio/video data, can be sent to 3Play’s outputs when Record is off, but (like
Bookmarks) event marking depends on recording being enabled.
10.1 RECORD CONFIGURATION
The first step toward recording is deciding which live inputs will be captured, and on which hard drives
the data from various inputs will be stored.
Figure 102 – 4RU options shown
These important decisions are made in the Startup Screen at the time of first creating a new session. We
detailed all of the important aspects of session configuration back in Section 5.2.1.
Note: The Record Configuration options you choose are retained with the session, and cannot be altered
after launching it. To work with a different Record Configuration, create a new session.
10.2 STORAGE VOLUMES
The Record Configuration options controls (Figure 102) list storage volumes that are currently mounted
on the system and available for capture purposes. The list may include suitable external drives along with
3Play’s internal drives, and also network-attached storage devices and volumes.
Drives that are clearly too small (or too full to accommodate further capture) are not shown.