2
|
Laundry Collection by Newtech - Installation Instructions
www.newtech.co.nz
Preparation
3. ENSURE WALLS ARE PLUMB AND FLOORS ARE LEVEL
Locate your stud positions throughout the wall, take note of this so you are aware
of these positions when you cover them up with the tall units. All units and cabinets
require fixing to support nogs fitted between the studs, to give a solid wall backing.
All cabinets need to be attached to the wall using a minimum of 8 gauge 60mm
screws if you have a stud wall.
If your wall is brick or concrete you will need advice from your hardware specialists
on the correct fixing methods.
Ensure the wall is plumb and straight, ensure floor is level. If you fix the product to a
non-plumb wall or floor the following will happen:
•
Your door or drawers will not operate correctly
•
Door or drawer adjustments will not align.
•
Basins will not sit level, which may cause water to pool or not drain correctly
If it is not possible to make the wall or floor plumb and straight you must pack the
vanity out so that it does not follow the out of aligned wall.
Floor standing cabinets must sit on a level floor or be packed to sit level and true.
NOTE: We recommend using cabinet connectors to join all adjoining floor and
tall cabinets together and all adjoining wall cabinets together before fixing the
cabinets to the wall. This will help with easier cabinet installation and overall
levelling. Don’t forgot to adjust the feet on the floor cabinets for easy levelling.
IMPORTANT
- Newtech recommends that a qualified tradesperson install this product
and that it is installed to
a professional standard
. This product carries a full warranty
against faulty
workmanship and materials.
Please inspect for damage before
installation. It is the responsibility of the installer to
make any adjustments
to doors/
drawers after installation if required.
Preparation - Prior to installation
1. CHECK PRODUCTS FOR ANY DAMAGES
Please inspect all products thoroughly before installation to ensure that the products
have not been damaged in transit, and that the products are correct. No claims for
damage or incorrect items will be processed if installation has begun. We cannot cover
warranty for removal or re-installation costs.
All items damaged by freight must be reported within 24 hours
, otherwise a claim
cannot be raised. A Goods Authority number must be obtained from the Newtech
Customer Service Team on 0800 728 662 before any damaged product can be
returned. This needs to be attached to the returned product.
2. CHECK SUPPORT BEAMS & NOGS
