background image

 

NewRider™ 5000 Airless Riding Field Line Striper 

ALWAYS wear safety goggles or protective eye-wear when operating the unit

!

 

 

NewRider™ 5000 Manual / 3033.0618 

Page 19 of 19

 

 

WARRANTY – 36 MONTH 

NEWSTRIPE, INC., WARRANTS TO THE ORIGINAL PURCHASER, FOR 36 (THIRTY-SIX) 
MONTHS AFTER DATE OF PURCHASE, THAT THE EQUIPMENT* HEREBY SOLD SHALL BE 
FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP.  THIS WARRANTY DOES NOT 
EXTEND TO ANY DAMAGE OR MALFUNCTION RESULTING FROM MISUSE, NEGLECT, 
ACCIDENT, IMPROPER OPERATION, OR NORMAL WEAR AND TEAR. 

Damage incurred in shipment from Newstripe, Inc. to the customer is the total responsibility of the 
carrier.  The CUSTOMER MUST NOTE DAMAGES on the Bill of Lading of Trucking Company or 
Railroad; and Newstripe, Inc. will furnish to the customer the cost or parts and labor.  The customer can 
then bill the common carrier for the damages by placing his signature on the documents. 

The Newstripe, Inc. obligation under this warranty and any implied warranties is limited to replacement 
or repair of defective parts of its manufacture without charge for 36 (THIRTY-SIX) months from date of 
purchase. For service under this warranty, buyer shall ship the defective part or parts of the equipment, 
transportation prepaid, to Newstripe, Inc. together with a written description of any claimed defect and 
proof of purchase date of the materials being returned. 

Prior to retuning any part or machine, the 

CUSTOMER must obtain a Return Materials Authorization number. Call 1-800-624-6706.  

 

*Gasoline engines, compressors, pumps (including airless) and Transaxles are furnished with their 
respective manufacturer's warranties only.  Such components are not covered by any warranty of 
Newstripe, Inc. Where Newstripe elects to extend manufacturers’ warranties, the warranty shall be 
pro-rated as to cover 100% of the cost to replace or repair materials and parts for the first 12 
months of ownership and 60% for the remaining 6 month period. 

The responsibilities described above are the only responsibilities of Newstripe, Inc. under this written 
warranty or any implied warranty, and may be exercised only within 36 (THIRTY-SIX) months from the 
date of purchase.  In no event shall Newstripe, Inc. be liable for incidental or consequential damages and 
no person had any authority to bind it to any representation or warranty, not be responsible for work done, 
materials furnished or repairs made by others without its' specific written authorization. 

THIS WARRANTY SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED 
OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, AND THERE IS NO OTHER REPRESENTATION OR WARRANTY OF 
ANY KIND WITH RESPECT TO THE GOODS SOLD HEREBY EXCEPT AS SET FORTH HEREIN.  
IT IS EXPRESSLY AGREED THAT THIS WARRANTY SHALL BE LIMITED TO THE 
ADJUSTMENT, REPAIR OR REPLACEMENT OF PARTS AND THE LABOR AND SERVICES 
REQUIRED THEREBY.  IN NO EVENT, INCLUDING ANY CLAIM FOR NEGLIGENCE, SHALL 
NEWSTRIPE, INC. BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

 

Sincerely, 

Newstripe, Inc. 

Содержание NewRider 5000






















Отзывы: