7
----------------- Push Button:
Switch to the control status
There is a button on the panel of
Local unit
which can be pushed
(switched) in sequence to select the operation modes.
Button on Local unit NS560UTP
The button on the panel of
Local unit
can be pushed(switched) in
sequence to select the following three modes:
Auto
Ш
Loc
Ш
Com(Remote)
Auto:
1. In this mode, the Remote and Local LEDs are flashing
alternately.
2. The system is now waiting to take control of either from
Local unit
or from
Remote unit
. Once the keyboard or mouse
of
Local unit
is active, the LED of Local is on and the LED of
Remote is off. This status indicates that the
Local unit
is now
taking control of the system and vice versa for
Remote unit
. In
this case, the latch time period of 5, 15, 30, or 60 seconds is
offered to allow the
Local unit
or
Remote unit
to take control
again if the latch time is due and the status returns to the
“
Auto
” mode.
In “
Auto
” mode, whenever the
keyboard
,
mouse buttons
or
scroll wheel
of mouse is activated, the Unit (
Local unit
or
Remote unit
) immediately takes control of the system.
Local:
The LED of Local is “
On
”. In this mode, the system controls
its local computer.
Remote:
The LED of Remote is “
On
”. In this mode, the system
remotely controls the
Local unit
.