8
----------------- Hotkeys Control
The
KVM Extender
interprets keystrokes for hotkeys all the time. A
hotkey sequence starts with two
left
Ctrl
keystrokes followed by one
or two more keystrokes. A built-in buzzer generates a high-pitched
beep for correct hotkey command, while one short and one long
beeps are sounded for wrong commands. Thus, the bad key
commands will not be forwarded to the selected modes.
There is an unique Hotkey command of
Ctrl + Ctrl + Alt+E
you
should be well aware when the
KVM Extenders
are connected to
other KVM Switches.
To switch to this mode, press
left
Ctrl
twice, hold
Alt
and press
E
key(press both keys simultaneously). This function is used to prevent
from misunderstanding once the system is connected to
NewStar’s
KVM Switches.
Thus, the user can choose either the control mode of
KVM Extender
or the number of computer connected to the
KVM
Switches
.