SonoDur3
– Quick Start Guide
NewSonic SonoDur3 with LEEB
Issue 00, 09/2020
Page 6
9. Place the probe on the test material and press the release button, the measurement will be
displayed direct in the measuring menu.
10. The battery status of the probe will be visible in the right upper corner in the main menu after
the first measurement and updated with every reading.
4
Important Notes
It is not possible to run both applications simultaneously, switching between the applications by pressing
the hard button with the circle symbol will always end the active application. All data will be kept and be
present after the re-start of the application.
If the UCI probe is connected, the UCI application might automatically started depending on the operational
mode. We recommend to switch to PC mode if the LEEB probe is used.
The software runs only on SonoDur3 with a valid license file on it (the license file which is already on the
instrument is sufficient).
If the probe is not found, make sure to switch on the probe first before starting the SonoDur-L
application!
