Newport Spectra-Physics ST-200, Руководство пользователя

Страница: 32 / 36

32 Software Application
•
Overload duration: If feedback overload detection is enabled, specify the
amount of time for which feedback signal overload is allowed before the
controller generates a warning message.
•
Enable auto-ranging. Uncheck this box if you do not want the pre-
amplifier gains adjust to vibration environment. The box should be
unchecked if the payload operation involves high vibration levels for short
periods of time.
5.1.5.4 Miscellaneous
•
Click on “Apply Settings” button in order for the application to send any
changes made on this tab to the controller.
•
Click on “Save Settings to File” button to save the controller’s settings to
a file on user’s PC.
•
Click on “Restore Settings from File” button to restore the controller’s
settings from a file on user’s PC.
•
Click on “Restore Default Settings” button to restore the controller’s
settings to default values.
Figure 23 Options Tab Screen.