OPS-A
Arc Lamp Power Supplies
Page 3
1 GENERAL INFORMATION
Thank you for your purchase of this OPS power supply from Oriel Instruments.
Please carefully read the following important safety precautions prior to unpacking and operating this
equipment. In addition, please read
the complete User’s Manual for additional important notes and
cautionary statements regarding the use and operation of the system.
1.1 SYMBOLS AND DEFINITIONS
WARNING
Situation has the potential to cause bodily harm or death.
CAUTION
Situation has the potential to cause damage to property or equipment.
ELECTRICAL SHOCK HAZARD
Hazard arising from dangerous voltage. Any mishandling could result
in irreparable damage to the equipment, and personal injury or death.
EUROPEAN UNION CE MARK
The presence of the CE Mark on Newport Corporation equipment
means that it has been designed, tested and certified as complying
with
all
applicable
European
Union
(CE)
regulations
and
recommendations.
NOTE:
Additional important information the user or operator should consider.
Please read all instructions that were provided prior to operation of the system.
The safety of any system incorporating the OPS power supply is the sole responsibility of the assembler
of the systems.
If the equipment is used in a manner not specified by Newport Corporation, the protection provided by the
equipment may be impaired.
If there are any questions, please contact Oriel Instruments or the representative through whom the
system was purchased prior to use.
