28
S
SE
EC
CT
TIIO
ON
N 5
5 S
SP
PE
EC
CIIF
FIIC
CA
AT
TIIO
ON
NS
S
INPUT TYPE:
Thermocouple: ..........................................J,K,T, or E (Chromel-Constantan)
Calibration:.....................................................................IEC 584-1 (IPTS-68)
Configuration: .............Single-ended (-TC lead connected to Analog Return)
Polarity:................................................................................................Bipolar
Cold-junction Tempco: ...............................................................±0.1 deg/deg
Sensor-wire resistance effect per conductor:
Type E: 50 µdeg/deg/Ω, up to 2000Ω
Sensor-break Current:.........................................................................333 nA
Sensor-break Indication: ...........Meter displays positive overrange (upscale)
NOISE REJECTION
NMR†, SIG HI to SIG LO: ....................................................70 dB, 50/60 Hz
CMR†, Analog RTNto PWR GND: ...............................120 dB, DC to 60 Hz
CMV†, Analog RTNto PWR GND: ...................Dielectric strength to 1500 V
transient per 260 Volt rms or
DC working voltage.
ACCURACY at 25°C
Range for rated accuracy
Thermocouple Type: ..........................................................Refer to Table 5-1
Maximum Error: .................................................................Refer to Table 5-1
Resolution: .........................................................................Refer to Table 5-1
Span Tempco: ..............................................................±0.02% of reading/°C
Full-Scale Step Response: ....................................................................... 1 s
Warmup to Rated Accuracy: .............................................................. 30 min.
ANALOG OUTPUT (linearized)
Voltage:..........................................................................................1mV/count
Calibration Error:..................................................... ±1% of reading ± 1.0mV
on °C, ± 1.8mV on °F
Source Resistance: ................................................................................100Ω
ANALOG TO DIGITAL CONVERSION
Technique:.............................................................Dual-slope, average value
Signal Integration Period: ...................................................................100 ms
Read Rate: ..............................................................................................2.5/s
1
S
SE
EC
CT
TIIO
ON
N 1
1 IIN
NT
TR
RO
OD
DU
UC
CT
TIIO
ON
N
1
1..1
1 U
UN
NP
PA
AC
CK
KIIN
NG
G
Remove the Packing List and verify that all equipment has been
received. If there are any questions about the shipment, use the
phone numbers listed on the back cover to contact the
Customer Service Department nearest you.
Upon receipt of shipment, inspect the container and equipment
for any signs of damage. Take particular note of any evidence
of rough handling in transit. Immediately report any damage to
the shipping agent.
The carrier will not honor any claims unless all shipping
material is saved for their examination. After examining
and removing contents, save packing material and
carton in the event reshipment is necessary.
Verify that you received the following items in the shipping box:
QTY DESCRIPTION
1
Panel Thermometer with 3 small connectors plugged
into the rear of the meter.
1
Operator’s Manual
28
S
SE
EC
CT
TIIO
ON
N 5
5 S
SP
PE
EC
CIIF
FIIC
CA
AT
TIIO
ON
NS
S
INPUT TYPE:
Thermocouple: ..........................................J,K,T, or E (Chromel-Constantan)
Calibration:.....................................................................IEC 584-1 (IPTS-68)
Configuration: .............Single-ended (-TC lead connected to Analog Return)
Polarity:................................................................................................Bipolar
Cold-junction Tempco: ...............................................................±0.1 deg/deg
Sensor-wire resistance effect per conductor:
Type E: 50 µdeg/deg/Ω, up to 2000Ω
Sensor-break Current:.........................................................................333 nA
Sensor-break Indication: ...........Meter displays positive overrange (upscale)
NOISE REJECTION
NMR†, SIG HI to SIG LO: ....................................................70 dB, 50/60 Hz
CMR†, Analog RTNto PWR GND: ...............................120 dB, DC to 60 Hz
CMV†, Analog RTNto PWR GND: ...................Dielectric strength to 1500 V
transient per 260 Volt rms or
DC working voltage.
ACCURACY at 25°C
Range for rated accuracy
Thermocouple Type: ..........................................................Refer to Table 5-1
Maximum Error: .................................................................Refer to Table 5-1
Resolution: .........................................................................Refer to Table 5-1
Span Tempco: ..............................................................±0.02% of reading/°C
Full-Scale Step Response: ....................................................................... 1 s
Warmup to Rated Accuracy: .............................................................. 30 min.
ANALOG OUTPUT (linearized)
Voltage:..........................................................................................1mV/count
Calibration Error:..................................................... ±1% of reading ± 1.0mV
on °C, ± 1.8mV on °F
Source Resistance: ................................................................................100Ω
ANALOG TO DIGITAL CONVERSION
Technique:.............................................................Dual-slope, average value
Signal Integration Period: ...................................................................100 ms
Read Rate: ..............................................................................................2.5/s
1
S
SE
EC
CT
TIIO
ON
N 1
1 IIN
NT
TR
RO
OD
DU
UC
CT
TIIO
ON
N
1
1..1
1 U
UN
NP
PA
AC
CK
KIIN
NG
G
Remove the Packing List and verify that all equipment has been
received. If there are any questions about the shipment, use the
phone numbers listed on the back cover to contact the
Customer Service Department nearest you.
Upon receipt of shipment, inspect the container and equipment
for any signs of damage. Take particular note of any evidence
of rough handling in transit. Immediately report any damage to
the shipping agent.
The carrier will not honor any claims unless all shipping
material is saved for their examination. After examining
and removing contents, save packing material and
carton in the event reshipment is necessary.
Verify that you received the following items in the shipping box:
QTY DESCRIPTION
1
Panel Thermometer with 3 small connectors plugged
into the rear of the meter.
1
Operator’s Manual
