newmotion Home Advanced Edition 7, Руководство пользователя

Страница: 17 / 18

INSTALLATIEHANDLEIDING – P17 VERSION 0129NM02INT01
INSTRUCTION MANUAL – P17 | P17 06A0RNM20ENG05
7.1 REGULAR USE
The first step is to connect your car to the charge point
by plugging in the charge cable, the session will start
automatically. Unplug the charge cable at the side of the
car to stop the charge session.
When the car has delayed charging configured, the LED
will remain green, until charging can start from car and
charge point.
When the charge point is configured to keep the cable
lock permanently closed, the cable can only be removed
after turning the power supply off.
Start charging? Plug in
Stop charging? Unplug at car
Full or waiting to charge
Plug in the charge cable in car
Charging
Error
Flashing green: starting procedure
7.2 ON/OFF PEAK CHARGING
This charge point has the feature of On/Off peak
charging. When this feature is installed, the owner of
the charge point will be able to determine whether this
feature may be enabled using the 3-way switch in the
fuse box. An explanation of the position of the switches
is given below:
Position A
Charging is always allowed, despite the On/Off peak
signal of the smart meter.
Position B
Charging will only happen in Off peak. However, when
the switch to Off peak occurs while the car is charging,
the charge session will continue until the car is full
without disturbing the charge session.
Position C
Charging will only happen in Off peak. When the switch
to On peak occurs while the car is charging, the charge
session will be delayed until another Off peak.
7. USER MANUAL & TROUBLESHOOTER
7.3 TROUBLESHOOTER
DO YOU SEE A RED LED LIGHT ON YOUR CHARGE
POINT?
If so, it means your car won’t charge when plugged in.
To fix this issue, turn
off the Mechanical Circuit Breaker
in the fuse box, wait 15 seconds, and turn it back on .
IS YOUR CABLE STUCK IN THE CHARGE POINT?
If you remove the charge cable from the car and the LED
on the charge point turns out, the permanent cable lock
feature of the charge point is enabled. If you do not want
this feature, ask your installer to disable.
If you are unable to release the charge cable from your
car, turn
off the Mechanical Circuit Breaker in the fuse
box and you will be able to release the cable. After
releasing your charge cable, you can switch the power
back
on by turning the Mechanical Circuit Breaker on .
DOES YOUR CAR CHARGE NOT CHARGE OR
CHARGES VERY SLOWLY WHEN USING THE LOAD
SHEDDING FUNCTIONALITY?
Please check whether the charging speed of your
car varies. If the charging speed varies, there is little
available capacity, as Load Shedding is an automatic
function, the charge point takes into account the total
electrical consumption of your household.
If charge speed does not increase when most of the
devices in household are turned off, communication
between your charge point and the Load Shedding
module may be lost. Turn
off the Mechanical Circuit
Breaker, wait 15 seconds, and turn it back on .
If the issue remains, contact your installer to check that
the cable is working properly.