Phone: 714-751-0488
Fax: 714-957-1621
E-Mail: [email protected]
www.newmarpower.com
P.O. Box 1306
Newport Beach,
California 92663
19
If this condition occurs soon after the inverter is turned on, it may be due to an un-
dersized, old/weak battery system or to under-sized/over-length battery wiring. Verify
proper battery capacity and health then recharge fully.
2) “Overload”
L.E.D.: This may be due to either of two causes; short circuit or too
much wattage demand. Remove all AC loads. If the indicator remains lit, then a short
circuit is likely. Check AC output wiring carefully. If load removal causes this L.E.D.
to be extinguished then the demand is probably exceeding the inverter's rating. Check
the total wattage of all appliances being used at one time and this is within the unit’s
rating.
3) “High Temperature”
L.E.D.: The inverter employs an integral cooling fan which
operates automatically to keep the unit within rated operating temperature—under
normal operation, and when properly installed. It is also protected, however, by an
internal thermal switch which shuts the unit completely off when it gets too hot. This
is typically due to being located in a high temperature area or a small enclosure which
restricts air flow, or due to a blockage of the air intake of the cooling fan. Ensure free
flow of air around and into the unit. Relocate it if necessary.
Note
: The thermal switch
is self-resetting, so the inverter/charger will automatically return to service when it
cools to a safe operating temperature. Nevertheless, thermal cycling of this sort will
shorten the life of the unit, and should not be allowed to continue if it is noted.
VI)
SPECIFICATIONS
MODEL
12-1800IC 12-1801 ICF
12-2500IC
24-2200IC 24-2201 ICF
32-2400IC
Inverter Output:
VAC
115V
230V
115V
115V
230V
115
Hz.
60
50
60
60
50
600
Watts (Surge)
4000
4000
5500
6500
6500
6500
Watts (Cont.)
1800
1800
2500
2200
2200
2400
Wave Type
Pure Sine
Quasi-Sine
Pure Sine
Pure Sine
Pure Sine
Pure Sine
Inverter Input:
VDC
11-14
11-14
11-14
22-28
22-28
29-38
Max Amps
180
180
250
110
110
100
Charger Output:
VDC (@ Float)
13.2
13.2
13.2
26.4
26.4
35.2
Max Amps
85
85
100
40
40
30
Charger Input:
VAC
115V
230V
115V
115V
230V
115V
Hz.
60
50
60
60
50
60
Max Amps
15
8
15
15
8
15
Weight:
Lbs.
54
59
54
57
65
59
Kg.
24.5
26.8
24.5
25.9
29.5
26.8
Case Size (all models):
H
W
D
7.5" (19 cm)
16.0" (40.6 cm)
15.5" (39.4 cm)
Internal Charger Type:
Three stage “smart charger”, programmable;
Output voltage depends on program selected for gel, flooded lead-acid,
or AGM battery type
Charger Output Voltages (as determined by Charger Output Selector)