Newlux WindPure Stand W1050 Smart, Руководство пользователя

Страница: 23 / 66

EN
23 |
Setting the device
Manual tilting head. The fan head assembly can be tilted to direct the
breeze up or down.
Make sure the fan is disconnected from the power supply before
adjusting the tilt angle.
Timer
This appliance is equipped with a timer and automatic switch-off.
• Press the ROTATE button for 3 seconds on the control panel: the
display will flash. Then press the ROTATE button for each 1 h to be
added. The display will then stop flashing after 3 seconds, which
means the timer setting is finished and the fan will run under the
timer setting. The timer symbol will light up.
Range: 1- 18 hours.
The time increases and decreases in 1-hour intervals.
IMPORTANT: : Unplug the fan from the mains if it is not going to be used
for a long period of time.
Remote control
There are four function keys on the remote control. To operate the
device with the remote control, you must point it at the fan. The signal
reaches long distances.
ON/OFF
Oscillation
Speed
Timer
On/Off Speed
Rotate Timer