16
Power off
Software Installation
Press
PC Power
to turn off the OPS (for all-in-one models only).
Press
Power
on the control panel or
Power
on the remote controller to enter
the standby mode. The power indicator turns red.
In the standby mode, switch off the rocker switch to turn off the interactive touch
screen.
Step 1:
●
Recommended configuration:
− CPU: Inter (R) Core i3 2.27GHz or AMD CPU with equivalent performance and above
− Memory: 1GB
− Hard drive: 1GB
− Graphics card: supports DirectX 9 or above
●
If the interactive touch screen is equipped with the latest version of handwriting
software in the PC before being delivered, please skip the step.
●
HID driver-free function only applies for Vista, Windows 7or higher version (realize the
functions of multi-touch etc.). The interactive touch screen with Windows XP version
should install/run the software for normal use.
Step 2:
Step 3:
Status of the power indicator is as follows:
Power Indicator
Status
No light
Powered off
Red
Standby
Green
Powered on
WARNING
●
Please turn off the OPS before you turn off the interactive touch screen.
Otherwise, the computer may be damaged.
●
Disconnect the interactive touch screen from power after the screen enters
standby mode. Otherwise, the screen may be damaged. A sudden power failure
may damage the interactive touch screen.
●
Frequent power on and off in a short time may cause faults.
