5
LAYOUT PLAN B - TRADEPRO ALCOVE (DOOR ONLY)
OPTION B: TRADEPRO ALCOVE
(DOOR ONLY)
Applies to 900 and 1000mm door sizes with acrylic
base applications.
THIS IS A BRIEF OVERVIEW OF HOW TO SET UP A
DOOR ASSEMBLY ONLY.
This runs in conjunction with the general instruction
sheet. All other installation steps can be now followed
in the general instructions eliminating the return panel
details that do not apply.
ALCOVE TRAY NOTES
Acrylic Tray:
1.
Installed firmly against the wall framing on the
three sides as per separate tray instructions.
2.
The standard liner is matched if using 10mm
Aqualine Gib with clearance each side to allow
glue and any minor discrepancies in walls.
The following table covers the door size with the minimum and maximum range. Care must be
taken if using the minimum or maximum measurements as discrepancies in the walls or base may
not allow for this.
SHOWER DOOR TYPE
FRONT DOOR PANEL MIN/MAX
900 Door
830 to 910mm
1000 Door
930 to 1010mm
SHOWER LINE TO TRAY EDGE
Acrylic Tray
15mm
Dotted Line:
Outer boundary
Shower Line to Tray Edge
(See Table)
NOTE:
All measurements assume the floor is level, the walls are plumb and all surfaces are flat. Any
variation must be adjusted for in the measurements provided.