NewLine TC-51D, Руководство пользователя

Страница: 19 / 28

- 18 -
* Please pay attention to the following:
1.Computer hardware requirement: 1.8 GHz Intel (R) Core Duo processor, 2GB RAM,
Independent display card with 1GB of Video RAM, USB 2.0 port, Hard disk 40G or more,
Monitor display resolution higher than XGA (1024x768, 6bit high color or above).
2.Operating system: windows 7/Windows 8.
3.Must use a high-speed USB 2.0 cable provided.
4.When connecting the Visualizer to a desktop computer with the high-speed USB 2.0 cable
provided, we recommend using the USB port located on the rear of the mainframe. The USB
port on the front of the computer might have interference.
The USB port can be used to store still images and video clips from the Visualizer in a computer.
Connect the Visualizer to your computer with the supplied USB cable. The Visualizer software
is available on the supplied CD-ROM.
USB Port
● USB image/video capture
You can capture images and videos on the Visualizer from a computer connected with a USB
connector.You can also save the contents with image-snap and video-recording functions. The
Software Manual in the CD-ROM will tell you how to do these.
Note: Do not connect/disconnect the USB cable when the application is running, which
will cause the program to be interrupted.
Note: You can also control the Visualizer from a computer connected with a RS232 port.
● Controlling Visualizer by computer
You can control the Visualizer from a computer connected with a USB port.
A.Connect the computer and the Visualizer using a USB cable.
B.Double click X:\ 232 Control\Control Panel (you can open this file from the CD and double click it,
or copy this file to any directory on your computer's hard driver and double click to launch it).