Newland NLS-HR42 Скачать руководство пользователя страница 81

Страница: 81 / 265

USB HID-POS

Introduction

The HID-POS interface is recommended for new application programs. It can send up to 56 characters in a single USB

report and appears more efficient than keyboard emulation.

Features:



HID based, no custom driver required.



Way more efficient in communication than keyboard emulation and traditional RS-232 interface.

Note:

HID-POS does not require a custom driver. However, a HID interface on Windows 98 does. All HID interfaces

employ standard driver provided by the operating system. Use defaults when installing the driver.

@INTERF8

USB HID-POS

Access the Scanner with Your Program

Use CreateFile to access the scanner as a HID device and then use ReadFile to deliver the scanned data to the application

program. Use WriteFile to send data to the scanner.

For detailed information about USB and HID interfaces, go to

www.USB.org

Содержание NLS-HR42










































































































































































































































































Результаты поиска

Содержание NLS-HR42

Отзывы:

Newland NLS-HR42, Руководство пользователя, Страница: 81 / 265

Результаты поиска

Содержание NLS-HR42

Отзывы: