Newland NLS-HR3260 Series, Руководство пользователя

Страница: 32 / 155

【
Enter Setup
】
Scan Mode
Manual Mode
A trigger pull activates a decode session. The decode session continues until the barcode is decoded or
you release the trigger or decode session timeout expires.
**
【
Manual Mode
】
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is
programmable in 1ms increments from 0ms to 3,600,000ms. The default setting is 3,000ms.
【
Decode Session Timeout
】
Set the Decode Session Timeout to 1,500ms:
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcodes “1”, “5”, “0” and “0”. (See the Digit Barcodes in
Appendix )
4. Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix )
5. Scan the Exit Setup barcode.
**
【
Exit Setup
】
22