Newland NLS-HR15, Руководство пользователя

Страница: 57 / 300

Enter Setup
41 ** Exit Setup
Bad Read Message
You may scan the appropriate barcode below to select whether or not to send a bad read message (user-programmable)
when a good read does not occur before trigger release, or the decode session timeout expires.
** Bad Read Message OFF
Bad Read Message ON
Set Bad Read Message
A bad read message can contain up to 7 characters (HEX values from 0x00 to 0xFF). To set a bad read message, scan the
Set Bad Read Message barcode, the numeric barcodes representing the hexadecimal values of desired character(s) and
the Save
barcode. The default setting is “NG”.
Set Bad Read Message
Set the bad read message to “F” (HEX: 0x46):
1. Scan the Enter Setup barcode.
2. Scan the Set Bad Read Message barcode.
3. Scan the numeric
barcodes “4” and “6” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.