Newland NLS-FM420, Руководство по интеграции

Страница: 34 / 199

nlscan.com Page 24
Code Programming ON
Code Programming OFF
Tools
Query Product Information
Product information could be obtained by reading "Query Product Information"
barcode. Firmware version could be obtained by reading "Query Firmware Version"
barcode.The scanner will send it to the Host immediately.
“
Power ON, Send Product Info
”
, the scanner sends product information through
serial port(only) to the Host after Power ON.
The product information is provided as follows:
Query Product Information
【
Pro CMD
：
0003000
】
Power ON, Send Product Info
【
Pro CMD
：
0007010
】
Query Firmware Version
【
Pro CMD
：
0003001
】
** Power ON, Do not Send Product Info
【
Pro CMD
：
0007000
】
Programming the Scanner
Title Remarks
Firmware Ver Device Firmware Version
Build Time Device Firmware Version Establishing Time
Device ID Device Type
App Ver Device Application Version
uIMG Ver Device uIMG Version
Date Device Manufacture Date
S/N Device serial number
ESN User-defined device serial number
Manufacture ID Device Name
Interface 1. RS232, baud rate, parity check, data bits, stop bit
2. USB, type of USB interface
1D Indicate that reading 1D is allowed. Symbols are divided by comma. Additional
features format:
1.
“
+
”
connect features
2. Min Message Length -> Max Message Length
3.
“
No Check Digit
”
or
“
Check Digit
”
4.
“
Fixed Length: 2~64 even value
”
.
It is in this format: Fixed Length: 2 4 6 8 10 12...
2D Indicate that reading 2D is allowed. Symbols are divided by comma.
Additional feature format:
Min Message Length -> Max Message Length
Scan Mode Scan Mode:
1. Manual Scan
2. Auto Scan
3. Continuous Scan
USB HID-KBW USB country keyboard type, poll rate.