25
Output Mode
The MT90 provides three output modes: Simulate keystroke, Output via API and Fill in EditText directly.
1.
Simulate keystroke:
Output scanned data to keyboard buffer to simulate keyboard input.
Character interval (ms):
A character interval of 0-100 milliseconds may be placed between the transmission of each
character of scanned data.
2.
Output via API:
Application acquires scanned data by receiving system broadcasts.
3.
Fill in EditText directly:
Output scanned data at the current cursor position in EditText.
Overwrite output:
Clear the text input box before sending the barcode currently scanned to make sure only most recently
scanned data is present in the text input box. This feature is available only when
Simulate keystroke
or
Fill in EditText
directly
is selected.
Output enter-event:
Send an Enter Key after each barcode scanned.
Scan Mode
The MT90 provides the following four scan modes:
1.
Level mode:
Press and hold the scan trigger to start a decode session which continues until the trigger is released.
2.
Continuous mode:
Press the scan trigger to continuously read barcodes. To suspend or resume scan operation, simply
press the scan trigger.
Scan interval (ms):
This parameter sets the timeout between decode sessions.
Содержание MT90 Orca
Страница 1: ...SCANNING MADE SIMPLE MT90 Orca III MT90 Orca Lite mobile computer user guide...
Страница 12: ...6 Cradle optional 1 Charging LED 2 MT90 Connector 3 Battery Compartment 4 Power Jack 5 Micro USB Port...
Страница 37: ...31...
Страница 51: ...45...
