Newland HR3260-CS, Руководство пользователя

Страница: 29 / 165

【
Enter Setup
】
19
**
【
Exit Setup
】
Pairing Settings
Pair Scanner with Cradle
A cradle with its DIP switch (see Fig. 1-
3) in the “C” position works as a normal cradle.
The scanner and cradle must be paired for communication to occur. A cradle can be paired with multiple
scanners.
You need to perform this operation manually: After the scanner and cradle are powered on, insert the
scanner in the cradle and then press the “M” button on the cradle. The scanner beeps on a successful
pairing.
Pair Cradle with Zigbee Router
A cradle with its DIP switch (see Fig. 1-
3) in the “R” position functions as a Zigbee router. You can extend
communication distance of the cradle by pairing multiple Zigbee routers with it.
To pair a cradle (DIP switch in
the “C” position) with a Zigbee router (DIP switch in the “R” position):
a. Pair a scanner with the cradle by following the instructions above.
b. Insert the paired
scanner in the Zigbee router and then press the “M” button on the router.
The scanner beeps on a successful pairing.
Search Paired Scanners
When scanner(s)
and cradle are powered on, press the “M” button on the cradle and the paired scanner(s)
will beep.