Newgrind Rhino RX7, Руководство оператора

Страница: 3 / 12

SPECIFICATIONS – This refers to variable speed hangrinder being attached
to RX7
Model RX7
Input Power 120/230V 50/60Hz
Amps 10A/15A
Plug Type 15A 125V or 10A 230V
Disc Diameter 4" / 100mm
Disc Speed (RPM) Variable
Machine Width 8.25" / 210mm
Weight 7lbs / 3.2kg
GENERAL SAFETY RULES
WARNING! Read and understand all
instructions. Failure to follow all instruc-
tions listed below, may result in electric
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Work Area
1. Keep your work area clean and well lit.
Cluttered floors and dark areas invite
accidents.
2. Do not operate equipment in
explosive atmospheres, such as in the
presence of flammable liquids, gases or
dust. Grinding can create sparks which
may ignite the dust or fumes.
3. Keep bystanders, children, and
visitors away while operating equip-
ment. Distractions can cause you to lose
control.
Electrical Safety
4. Do not abuse the cord. Never use the
cord to pull the equipment or pull the
plug from an outlet. Keep cord away
from heat, oil, sharp edges or moving
parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk
of electric shock.
5. When operating equipment outside,
use an outdoor extension cord marked
"W-A" or "W". These cords are rated for
outdoor use and reduce the risk of
electric shock.
Personal Safety
6. Stay alert, watch what you are doing
and use common sense when operating
equipment. Do not use equipment while
tired or under the influence of drugs,
alcohol, or medication. A moment of
inattention while operating equipment
may result in serious personal injury.
7. Do not overreach. Keep proper
footing and balance at all times. Proper
footing and balance enables better
control of the equipment in unexpected
situations.
8. Use safety equipment. Always wear
eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing
protection must be used for appropriate
conditions. Ordinary eye or sunglasses
are NOT eye protection.
9. DO NOT Turn on equipment while
the machine is tilted back. Any tooling
fastened to the machine can eject and
can cause injury. Machine must be
unplugged before tilting back.
Equipment Use and Care
10. The equipment is designed to
remove excess surface material. To
prevent damage to the equipment
and/or serious personal injury, beware
of protruding objects or other debris on
or embedded in the surface being
finished.
11. Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing equip-