Newgrind RHINO RLP800, Руководство пользователя

Страница: 6 / 22

RLP800 Users Manual
6
Safety Instructions
WARNING! Read and understand all instructions .
Failure to follow all instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS.
Work Area Safety
1. Keep your work area clean and well lit. Cluttered floors and dark areas invite accidents.
2. Do not operate equipment in explosive environments, such as in the presence of -
flammable liquids, gases or dust. Grinding can create sparks which may ignite the dust or
fumes.
3. Keep bystanders, children, and visitors away while operating equipment. Distractions can
cause you to lose control.
Personal Safety
1. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict
adherence to equipment safety rules. If you use this equipment unsafely or incorrectly,
you can suffer serious personal injury.
2. Stay alert, watch what you are doing and use common sense when operating equipment.
Do not use equipment while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating equipment may result in serious
personal injury.
3. Adequate ventilation of your work area is very important when using equipment. Use a
dust mask or appropriate respirator. Due to the dusty nature during use of
4. Do not overreach. Always keep proper footing and balance. Proper footing and balance
will enable better control of the equipment in unexpected situations.
5. Use safety equipment. Always wear eye protection, dust mask, non-skid safety shoes,
hard hat and hearing protection.
Ordinary eye or sunglasses are NOT eye protection.
6. DO NOT Turn on equipment while the machine is tilted back. Any tooling fastened to the
machine can eject and become a lethal projectile.
Equipment Safety and Care
1. The equipment is designed to remove excess surface material. To prevent damage to the
equipment and/or serious personal injury, beware of protruding objects or other debris
on or embedded in the surface being finished.