Newgrind RHINO RLP800, Руководство пользователя

Страница: 13 / 22

RLP800 Users Manual
13

Blow off motor fan with compressed air.

Remove tool plate holders and wipe down bearing shields with a damp cloth. Do not use
any sharp object or abrasive pad to clean the bearing shields. This can compromise the
bearing seal!

Re-install tool plate drivers using blue medium strength thread locking compound.

Using a soft scrub pad, remove any excess dirt build up from the bottom plate and back side
of pad drivers.

Inspect tool plate driver grommets for signs of wear. Replace grommets that show signs of
extensive wear.
Monthly Maintenance

Check all strain reliefs and make sure they are tight so as to avoid cords being pulled out of
the VFD or handle.

Remove tool plate drivers and inspect threads to make sure that there are no signs of cross
threading or stripping.

Clean and lubricate wheels.

Clean and lubricate latch mechanisms.