Hardware Installation
Before Installing the MAXPower RAID eSATA 6G-4e card:
• Make sure computer is turned off and unplugged from its power source
• Take appropriate electrostatic discharge precautions:
Step 1
Open the computer and locate an unused PCIe 2.0 or 1.0 slot.
Step 2
Remove the PCI slot cover.
Step 3
Gently insert the MAXPower card into the PCIe slot and secure the bracket to the
computer chassis.
Step 4
After installing the MAXPower card attach any eSATA storage devices to the card and
start your computer.
Page 4
Your computer is a static-sensitive device. It is susceptible to invisible damage if
not protected during installation. We recommend proper grounding by using
a grounding strap. Make sure to work in a clean and static-free area, and avoid
wearing clothing that retains static charges.
For more information, please visit:
www.newertech.com/static
NewerTech MAXPower RAID eSATA 6G-4e
• Any PC with an available PCIe 2.0 or 1.0 slot (PCIe x8 or x16 slot required)
• PCs with a Thunderbolt port and a PCIe expansion chassis may also be compatible with
this card when running Windows 7 SP1 or later. Check with your device manufacturer to
verify compatibility.
Mac® OS X®:
Mac Hardware:
Windows:
PC Hardware:
Part 2: System Requirements & Installation
• Intel® Mac with an available PCIe 2.0 or 1.0 slot
• Macs with a Thunderbolt port and a PCIe expansion chassis may also be compatible with
this card when running 10.6.8 or later (10.9 or later for Thunderbolt 2 devices). Check with
your device manufacturer to verify compatibility.
10.6.8 and later
Windows® Vista® and later
