Page 11
Page 4
Important note: You must use identical size and model hard
drives in this enclosure - you may NOT use 2 different size, or
model mechanisms.
Place your first hard drive into the case, attaching one of the
red SATA cables to the drive, and one of the red & yellow power
cables as well. It’s a tight fit so don’t put excess pressure on any
of the connections while performing this step.
DO NOT REMOVE SATA CABLES FROM BRIDGE CARD!
5VSOUIF/FXFS5FDIOPMPHZ(VBSEJBO."9JNVTESJWFFODMPTVSF
on it’s side so you can access the bottom screws as shown. Install
1IJMMJQTTDSFXTJOUPUIFIBSEESJWFUISPVHIUIFESJWFDBTFBOE
tighten securely.
Identifying the Guardian MAXimus front status
lights-
Chapter 3
5IF/FXFS5FDI(VBSEJBO."9JNVT
IBT-&%TUBUVTMJHIUTPOUIFGSPOUPG
the case to visually display what it is
doing and to warn you of any errors.
t5IFMFGUNPTU-&%JTBHSFFOQPXFS
light. This will illuminate normally
when the case is powered on.
t5IFNJEEMFUXP-&%T )%%BOE
)%%BSFHSFFOBOEXJMMJMMVNJOBUF
when hard drive #1 and hard drive
#2 are being written to. They will not
illuminate if the drive is not being ac-
cessed, they will turn off.
t*GBIBSEESJWFGBJMTPOFPGUIFNJE
-
EMFUXPMJHIUT )%%PS)%%XJMM
turn red, indicating which drive has
GBJMFE6QPOSFQMBDFNFOUPGUIFGBJMFE
drive mechanism, the failed mecha-
nism indicator light will flash from
red to orange, as it is being accessed to write data onto the drive,
SFCVJMEJOHUIFNJSSPSFE3"*%
t5IFSJHIUNPTU-&%JTUIF3FCVJMEJOEJDBUPS*GBESJWFIBTGBJMFE
BOEUIF(VBSEJBO."9JNVTJTSFCVJMEJOHUIF-&%XJMMJMMVNJOBUF
HSFFO*GUIFSFCVJMEGBJMTJUXJMMJMMVNJOBUFSFE*GUIF-&%JMMVNJ
-
nates red, please contact our support department for further
assistance.
In the event of a drive failure, rebuilding can take several hours
to overnight. You may continue to use your Newer Technology
(VBSEJBO."9JNVTBTZPVOPSNBMMZXPVMEEVSJOHUIFSFCVJME
process.
