From inside the shed, install four
Screws (AA)
into the roof,
two on each side wall.
Note: The screws also have to go through the Roof Brace
(RB) at each end to properly secure the roof!
A second person on the outside of the shed should hold
down the edge of the roof firmly at each screw location.
e.
Make sure
Front Roof (J)
is positioned tightly against the middle
Repeat Roof (M)
section.
Install
Roof Pins (FF)
in four places. If necessary, use
Roof Pin Assembly Tool (GG)
to pull the roof down.
c.
GG
FF
1. Insert pin in slot.
2. Push all the way through.
3. Rotate head flush with roof.
Install Roof Pins four places.
J
Install
Left Door (L)
and
Right Door (K)
into hinge openings
of
Front Floor (A)
and hinge sockets in
Front Roof (J).
Note: Only raise
front edge of roof enough to install the
door hinge pins.
d.
L
L
K
K
J
J
A
A
AA
(4)
RB
click
FF
FF
