Newcon Optik NVS 14, Руководство оператора

Страница: 19 / 32

15
FIGURE 3
1. “Swing arm” mount
2. Grooved pad
3. Locking knob
4. Unit groove
5. Flip button
6. US clip mount
6.7 Using the Unit with head gear or helmet
The Unit is supplied with head gear (5, Fig. 1). Prior to using
head gear adjust its straps so that the head gear fits head
comfortably but firmly and does not slide when you are moving.
The Unit is attached to the head gear with a swing arm mount (1,
Fig. 3). To attach the arm mount to the head gear loosen the
tightening screw (8, Fig. 1) on head gear, slide helmet groove (2,
Fig. 3) onto the rail, and then tighten the screw.
To attach monocular to the arm turn the knob (3, Fig. 3), slide
arm groove (4) along the dove tail platform of the monocular (10,
Fig. 1), and then release the knob.
Technical
drawing of US
clip mount
3
1
6
5
2
4