background image

iii 

IMPORTANT INFORMATION

 

Read prior to activation 

You have just purchased a sophisticated electro-optical device that emits 
invisible laser radiation.

 

To operate it properly, please read this manual 

carefully.

 

 

 

NEVER 

direct laser beam at the eyes of people or animals 

 

NEVER 

aim the unit at the Sun or bright sources of light 

 

NEVER

 

subject the unit to impacts 

 

NEVER

 

transport the unit without its case 

 

NEVER

 

disassemble the unit. This may be hazardous for you due to 

high voltage currents in the system 

 

ALWAYS

 keep the unit out of children’s reach 

 

ALWAYS

 

remove the battery when the device is not in use for a 

long period 

 

ALWAYS

 

store in a dry place 

 

Caution

 - use of controls or adjustments, or performance of 

procedures other than those specified herein may result in hazardous 
radiation exposure 

 

Caution

 - use of optical instruments such as binoculars, loupes, 

mirrors, lenses, etc. with this product increases eye hazard 

 

Note

: Avoid eye exposure to direct laser beam or its close reflection 

 

Prevent 

bright light from focusing through the eyepieces 

Содержание LRB 6000CI





















Отзывы: