7
6.5V this indicates that the battery is used up. You can still get readings,
but the battery needs to be replaced soon.
Using the Device
The LRB 6000CI operational procedures are design to allow the user to
use most applicable options in the fastest time possible. To activate it,
press and hold Action button (6, Fig.1) for one second. At start the unit
comes into Ready to Measure
mode indicated by the word ‘READY’ on
the display visible through the eyepiece.
Pressing Action button (6, Fig. 1) again will initiate measurement
procedure. The results of measurement are displayed in default form of
“Distance (M), Azimuth (mils) and Elevation (mils)” measurement
parameters also can be modified to user preference (see Setup Mode).
If results of measurement are unreliable four dashes (‘----‘) will be
displayed in the area (4, Fig. 3).
Pressing Mode button (5, Fig. 1) gives the user the options to change
settings from Factory default to specific modes required by user. For full
list of Mode options please refer to Operation and Service modes
If the target is located below the unit the result of vertical measurement
(elevation or height) will be preceded with minus (“-“) sign.
Factors affecting measuring distance
Target reflectivity depends on its color, surface finish, size, shape,
position in relation to the laser beam, etc. Bright target colors are more
reflective than darks. A polished surface is more reflective than a rough
one. Larger targets reflect better than small ones. Ranging a target
perpendicular to the laser beam provides better results than the one
positioned at a sharp angle to the beam.
Weather conditions that influence air transparency (rain, fog, snow, mist)
reduce maximum range. Bright sunny days will reduce performance as
well as IR sun radiation may cover reflected laser impulses.
While the unit will measure through many glass types, measuring
through glass may reduce accuracy.
Natural hand tremor decreases the accuracy of long distance ranging.
Using of a tripod is highly recommended.
Note: device may produce false readings when reticle is aimed at the sun
or in ± 20
˚
solid angle from the sun.
Содержание LRB 6000CI
Страница 1: ...Operation Manual LRB 6000CI LASER RANGE FINDER BINOCULARS 105 Sparks Ave Toronto ON M2H 2S5 Canada ...
Страница 2: ...ii ...
Страница 20: ...NEWCON OPTIK 2010 M711 20 B XIV ...