4
•
Adjust the distance between the eyes by turning both eyepiece
assemblies (3) until two images converge into one. This adjustment is
made tough intentionally to provide for a water resistance.
•
Adjust the focus individually for each eye using the focus adjustment
knobs (4).
•
put on the objective lens caps after you finish observation.
OPERATION DURING NIGHT
•
Unpack the unit from the soft case.
•
If the batteries were not installed, unscrew the battery cap (5) and
install the batteries, observing correct polarity as drawn schematically
on the body (1) (“-“ towards the bottom of the compartment).
•
The eye cups can be folded as shown below for eyeglasses wearers.
•
Remove the objective lens caps (7). Aim the unit to the observed
object.
•
Flip the switch (2) into “N” position. You will see greenish light through
the eyepieces with outlines of the observed object.
•
Adjust the distance between the eyes by turning both eyepiece
assemblies (3) until two images converge into one. This adjustment is
made tough intentionally to provide for a water resistance.
•
Adjust the focus individually for each eye using the focus adjustment
knobs (4).
•
Put on the objective lens caps and flip the switch into “D” position
after you finish observation.
