4
MCM-3-COMBO
Features/ Specifications
Newco Product Warranty
Newco warrants equipment manufactured by it for 90 days labor- 1 year parts.
These warranty periods run from the date of installation Newco warrants that the
equipment manufactured by it will be commercially free of defects in material and
workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment,
component or part that was not manufactured by Newco or that, in Newco’s
judgment, has been affected by misuse, neglect, alteration, improper installation
or operation, improper maintenance or repair, damage or casualty. This warranty
is conditioned on the Buyer 1) giving Newco prompt notice of any claim to be
made under this warranty by telephone at (800) 556-3926 or by writing to PO Box
852, Saint Charles, MO 63302; 2) if requested by Newco, shipping the defective
equipment prepaid to an authorized Newco service location; and 3) receiving
prior authorization from Newco that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER
WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of
Newco are not authorized to make modifications to this warranty or to make
additional warranties that are binding on Newco. Accordingly, statements by
•
Product to Water Ratio Range: 1.5:1 to 35.0:1
•
Cup Volume Range: 1.5 oz to 25.0 oz
•
Hot Water Temperature Range: 160 to 190 deg F
•
Concentrate Calibration Range: 2.5 oz to 10.0 oz
•
Water Calibration Range (Hot or Cold) 13.0 oz to 25.5 oz
•
Initial fill Timeout: 10 Minutes
•
Fill Timeout: 40 Seconds
•
Automatic Sanitation-Sanitation cycles at power up when water
temp reaches 160 degrees, 1 hour after last product dispensed,
and 24 hours after the last sanitation cycle
•
Electrical Specifications-120V 1500W 1ph / 240V 6000W 1ph
