Introduction
Newall Measurement Systems
2
1.0 INTRODUCTION
1.1 EMC and Low Voltage Compliance
The DPG2000 Digital Readout conforms to the relevant European standards for electromagnetic compatibility
and low voltage directive as detailed below.
BS EN 50081-2:
Electromagnetic compatibility.
Generic Emission Standard - Industrial Environment
BS EN 50082-2:
Electromagnetic compatibility.
Generic Immunity Standard - Industrial Environment.
BS EN 61010-1:
Safety requirements for electrical equipment for
measurement, control and laboratory use.
1.2 Technical Specifications
Dimensions:
Height:
140mm (5.5in)
Width:
240mm (9.5in)
Depth:
80mm (3.2in)
Weight:
2.5kg (5.5lbs)
Operating Voltage:
115 or 230V (switch selection)
Supply Voltage Fluctuation:
Not to /-15% of the operating voltage
Supply Frequency:
50 to 60 Hz
Maximum Power Consumption:
18VA
Operating Temperature:
0 to 45°C
Storage Temperature:
-20 to 70°C
Transducer Inputs:
Dependant on model, one, two or three Spherosyn/Microsyn transducers
Selectable Resolutions:
Spherosyn/Microsyn 10
5
μ
m (0.0002in) / 10
μ
m (0.0005in) / 20
μ
m (0.001in) / 50
μ
m (0.002in)
Microsyn 5
1
μ
m (0.00005in) / 2
μ
m(0.0001in) / 5
μ
m (0.0002in) / 10
μ
m (0.0005in)
Environmental Conditions:
Indoor Use, IP20 (IEC 529)
Relative humidity
- maximum 80% for temperatures up to 31°C decreasing
linearly to 33% at 45°C
Transient overvoltage according to INSTALLATION CATEGORY II of IEC664
POLLUTION DEGREE 2 in accordance with IEC664
Newall Measurement Systems reserves the right to change specifications without notice.
Certificate No FM36096
ISO 9001
