EN
www.newair.com
11
CHANGING DOOR SWING DIRECTION
Step 1:
Lay the unit on its back.
Step 2:
Remove the kickplate by removing the three retaining screws (FIG. 1).
Step 3:
Remove the four screws located on the lower door hinge (FIG. 2).
Step 4:
Pull the door downward until it releases from the upper hinge pin.
Step 5:
Remove the plastic screw cap from the top left-hand side (FIG. 3) and
install it on the top right-hand side of the door frame.
Step 6:
Unscrew the upper door hinge pin (FIG. 4) from the right side of the
countertop and install it on the left side of the countertop.
Step 7:
Position the door back on the cabinet and push up until the top hinge
pin is inserted into the top of the door.
Step 8:
Remove the lower support pin from the door and reposition it on the
lower hinge (FIG. 5).
Step 9:
Re-install the lower support pin on the right side of the door.
Step 10:
Make sure to align the door and cabinet before fastening the lower
hinge screws to the cabinet.
Step 11:
Re-install the kick-plate.
