8
http://www.NewAir.com
5.
Make electrical connection to G73 according to relevant wire diagram.
Make connections using approved wire nut connectors and secure the
grounding wire to the ground screw on the heater chassis.
6.
Replace junction box cover of G73.
OPERATION
S
ETTING THE
T
HERMOSTAT
1.
Before connecting or
disconnecting plug, turn knob
fully counterclockwise (Figure 4).
2.
Heater is equipped with a
thermostat. To adjust
temperature to your individual
requirements, turn thermostat
control knob clockwise all the
way to turn heater on.
3.
When room reaches desired temperature, turn thermostat knob
counterclockwise until you hear a “click”. Leave in this position to maintain
room temperature at this setting.
4.
For additional heat, turn clockwise until you hear “click” again and heater
will turn on.
5.
To turn heater to the lowest setting, turn the thermostat knob
counterclockwise all the way.
CLEANING & STORAGE
R
EGULAR
C
LEANING
:
Before any cleaning:
Make sure the heater is turned off.
Disconnect power supply at source.
