EN
www.newair.com
7
environments; bed and breakfast type environments; catering and similar
non-retail applications.
•
To use this product, place it on a flat surface.
•
After unpack the ice maker, DO NOT turn on the Ice Maker. Wait 24 hours to
stabilize the refrigerant inside the ice maker before first time use.
•
Please make sure that the rear drain is firmly plugged before adding water to
the water tank.
•
The ice cubes produced will be relatively small at first. Do not be concerned
as this is not a defect. The unit will take a few cycles to produce the intended
size.
•
Do not use near heat or excessive dust.
•
Do not immerse machine in water, use it in bathrooms or places where it
may be splashed with water.
•
Do not dismantle or modify machine.
•
If a problem occurs, stop using the machine immediately.
•
Avoid touching any parts involved in ice making, and leave the lid closed
while running ice production cycle.
•
To unplug appliance do so by holding the head of the plug. Never pull by the
cord.
•
Periodically clean any accumulated dust off the plug head.
•
Do not plug in the unit’s power cord if hands are wet.
•
Disconnect the power supply and drain out the remaining water from the
rear drain if ice maker will not be used for an extended period.
•
We suggest using an ice maker cleaning agent or citric acid to clean
appliance before first use to avoid resulting ice from having dirt and/or odor
due to machine components being manipulated during assembly. If not
cleaned before use resulting ice may have dirt and/or odor that will
disappear after several cycles. DO NOT consume any ice with dirt and/or an
odor. This is not a defect.
•
Do not alter cooling circuit (piping).
•
Do not tamper with the power cord or power plug.
•
Do not use damaged power plugs or loose sockets.
•
If the supplied power cord is damaged, please contact customer service.
Allow damaged supply cords to be replaced by the manufacturer, service
agent or a similarly qualified person to avoid hazard to yourself.
