8
h
tt
p://www.NewAir.com
IMPORTANT: Your heater is equipped with a polarized alternating
current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your outlet.
Control Panel Functions
Timer Display
Temperature Display
Mode Display
Function Button
A
B
C
D
1. Check that neither the appliance nor the power cable has been damaged in
any way during transportation when first using the heater.
2. Place the heater on a firm level surface, at least 3’ (’0.9 m) away from any wall
and any other objects such as furniture, curtains, plants or combustible
material.
3. Plug into standard 120 V AC, 60 Hz source
4. Heat setting
Turn on the power switch and press the ON/OFF button to turn on the
heater.
Press MODE button to select the heat setting.
Press ON/OFF button again , the LED will be turned off and the heater
will stop working . When the heater is turned on , press MODE button
to select appropriate setting . which is shown in the LED as follow:
HI : Heater operates at a higher wattage, approximately 1500W.
LO : Heater operates at a medium wattage, approximately 900W.
ECO : Heater operates at eco mode.
5. Temperature setting (65°F-85°F).
When the heater is in operation press the (Temperature Increase) or
(Temperature Decrease) button to raise or lower the set temperature.
The heater will automatically set the temperature to 85°F if the temperature is
not set within 2 minutes after turning on the heater.
6. Timer setting
A. Setting the timer to turn on the heater.
When the heater is in stand-by mode (unit is plugged in but not operating),
press the TIMER button to set the time at which the heater will turn on. The
“2H” icon will be displayed on the control panel to indicate that the heater will
turn on after 2 hours. Press the timer button repeatedly to automatically turn
on the heater at any desired hour set in a sequence of 2-4-6-8-10. The timer is
adjustable up to 10 hours with an interval rate of 2 hours.
