10
CLEANING & STORAGE
It is recommended that the heater be cleaned at least once during the operating
season in order to provide the optimum level of performance. Always turn the
power switch off and unplug the heater before cleaning. Be sure to save the box
for off-season storage.
1. Turn the heater off, unplug it and wait for the heater to cool down.
2. Use a dry cloth to clean only the external surfaces of the heater.
3. Do not use any cleaning agents or detergents.
4. Never immerse the heater in water.
5. Pack the heater in the original carton and store it in a cool and dry place.
h
tt
p://www.NewAir.com
TROUBLESHOOTING
Problem
Possible Causes
Solution
There is no power.
Be sure it is plugged in and that the
electrical outlet is working.
One of the safety
protection devices
was activated to
prevent overheating.
Place the heater in upright position
and check for any obstructions. If you
find an obstruction, turn the heater
off. Unplug the heater and wait at
least 10 minutes for it to cool down.
Carefully remove the obstruction.
Plug the heater in and restart it as
described in the OPERATING
INSTRUCTIONS section. If you still
notice the same problem, remove the
plug from the outlet and contact the
NewAir Customer Support
Department.
The room
temperature has
reached the
temperature set at
the thermostat.
This is normal. The heater will restart
once room temperature is lower
than set temperature.
The set temperature
is lower than the
current room
temperature.
Set the desired temperature higher
than the current temperature
to restart the heater.
Your heater
shuts off
unexpectedly
or fails
to operate.
