New World NW 90EDO MK2, Инструкция по эксплуатации

Страница: 22 / 36

22
REPLACING THE OVEN LIGHT BULB
(Left main oven only)
Switch the cooker off at the mains.
When the oven is cool, unscrew and
replace the bulb with another one
resistant to high temperatures (300°C),
voltage 230 V (50 Hz), E14 and same
power (check watt power as stamped in
the bulb itself) of the replaced bulb.
Note: Oven bulb replacement is not
covered by your guarantee.
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a mild
detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with the
manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
• NOTE: The manufacturers of this appli-
ance will accept no responsibility for
damage caused by chemical or abra-
sive cleaning.
Attention: Do not store flammable
material in the oven.
Fig. 8.1
Fig. 8.2
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 8.1).
– Slide the tray and rack into the run-
ners (Fig. 8.2).
The shelf must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
– To dismantle, operate in reverse
order.