Caution
**Before powering up the unit perform the following steps**
1.
Align control cable notch to the notch in the controller. Push the connector in
forward and turn clock wise at least ¼ turn until the plug locks into the
connector on the case;
2.
Align power cable notch to the notch in the controller. Push the connector in
forward and turn clock wise at least ¼ turn until the plug locks into the
connector on the case;
3.
Connect main AC power plug to an appropriate AC power source (115V AC
or 220V AC according to the model);
4.
Make sure serial communication cable is disconnected.
Caution
Make sure that all connectors are secured prior to turning the power switch ON.
Failure to comply may result in equipment failure and/or equipment damage.
7
