NRP1012 Series IP Phone User Manual
New Rock Technologies, Inc. 3-3
3.1.8 Call Transfer
Blind Transfer
During conversion, you can press the
Transf
key, enter the number to transfer to, and press "
#
" to
transfer the current call to a third party. After the transfer, you are disconnected with the caller. Note
that you cannot select the SIP line when the call transfer is enabled.
Attended Transfer
To make an attended transfer, press the
Transf
key, enter the number to transfer to, and press
SEND
during the conversion. After the third party answers, press
Transf
to complete the operation. Note that
to enable this function, you need to enable call waiting and call transfer first.
Alert Transfer
During the conversation, press the key
Transf
, enter the number to transfer to, and press
SEND
(the
connection is not established yet). As soon as the call is answered, press
Transf
to complete the
operation. Note that to enable this function, you need to enable call waiting and call transfer first.
3.1.9 Three-Way Conference Call
Press the
Conf
key during the conversation.
The first call is placed on hold. Enter the conference ID to join after hearing a dial tone, and press
SEND
.
When the call is answered, press
Conf
and add the first call to the conference.
If you want to leave the conference, press the
Split
key.
Note: This function operates normally only when your VoIP service provider supports RFC3515. To
enable this function, you need to enable the call waiting function.
3.1.10 Multiple-Way Call
If theNRP1012/P is in the hook/handsfree/headset mode, press
HOLD
set the delay period (which is
displayed as “--” on the screen). Each–“-“represents two seconds. For example, if you enter "123-45”,
the phone will send out “45” two seconds after “123”; if you enter “123---45”, the phone sends out “45”
six seconds after “123”.
Note: The function key must be configured as a HOLD.
3.1.11 Multi-line
By default, you can register and concurrently use a maximum of 6 SIP accounts on the NRP1012/P.
Lines 1-4 corresponding to the NRP1012/P are SIP line, enabling you to select an SIP account to make
a call. If the SIP account corresponding to a certain line key fails to be registered, the NRP1012/P
prompts you the registration failure.
The NRP1012/P allows enterprise users to answer multi-way calls and make multi-line call. You can
answer a maximum of 10 incoming calls, with 9 calls being in held and only one call being answered
Содержание NRP1012
