NRP1002/P IP Phone User Manual
www.newrocktech.com 50/68
answer the call after specific delay.
Enable Intercom Mute
Enable mute mode during the intercom call
Enable Intercom Tone
If the incoming call is intercom call, the phone plays the intercom tone
Enable Intercom Barge
Enable Intercom Barge by selecting it, the phone auto answers the
intercom call during a call. If the current call is intercom call, the phone
will reject the second intercom call
Auto Answer By Headset
When this item is checked, the device will auto-answer phone calls by
headset if the auto-answer or intercom is enabled.
Ring From Headset
Enable Ring From Handset by selecting it, the phone plays ring tone
from handset.
Emergency Call Number
Configure the Emergency Call Number. Despite the keyboard is
locked, you can dial the emergency call number
Enable Password Dial
Enable Password Dial by selecting it, When number entered is
beginning with the password prefix, the following N numbers after the
password prefix will be hidden as *, N stand for the value which you
enter in the Password Length field. For example: you set the
password prefix is 3, enter the Password Length is 2, then you enter
the number 34567, it will display 3**67 on the phone.
Password Dial Prefix
Configure the prefix of the password call number
Enable Phone DND
Enable Phone DND
DND Response Code
Set the SIP response code on call rejection on DND
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection
Encryption Number Length Configure the Encryption Number length
Restrict Active URI Source
IP
Set the device to accept Active URI command from specific IP
address.
Push XML Server
Configure the Push XML Server, when phone receives request, it will
determine whether to display corresponding content on the phone
which sent by the specified server or not.
Allow IP Call
If enabled, user can dial out with IP address
Enable Multi Line
Enable phone to make calls for 10 lines max, or disable for 2 lines
max.
Enable Default Line
If enabled, user can assign default SIP line for dialing out rather than
SIP1.
Enable Auto Switch Line
Enable phone to select an available SIP line as default automatically
Play Talking DTMF Tone
Play DTMF tone on the device when user pressed a phone digits
during taking, default enabled.
Play Dialing DTMF Tone
Play DTMF tone on the device when user pressed a phone digits at
dialing, default enabled.
Caller ID Display Priority
Change caller ID display priority. The default priority is “Phonebook” >
